KSTI - Inch sizes - igus

CAD model selection

	1
	2
	3
	4
	5
	6
	7
	8
	9

		LINA Bill of material	ARTNR Part no. ⁿ/ₐ	SZK Maximum Static Tensile Strength Short term [N]	SZL Maximum Static Tensile Strength Long term [N]	SBA Maximum Static axial compressive strength [N]	AL Maximum Torque Longitudinal holes [Nm]	A Length [Inch]	D1 Diameter E10 [Inch]	B Width [Inch]	C1 Width [Inch]	H1 Height [Inch]	H2 Height [Inch]	M Length [Inch]	H3 Height [Inch]	D3 Width [Inch]	X2 Length [Inch]	SW1 Max. Pivot angle [°]

		KSTI-03	KSTI-03	550	275	300	0.6	1.40	0.1900	0.312	0.234	0.29	0.566	1.00	0.165	0.137	0.20	25
		KSTI-04	KSTI-04	600	300	300	0.6	1.75	0.2500	0.375	0.250	0.39	0.705	1.25	0.205	0.137	0.25	25
		KSTI-05	KSTI-05	800	400	400	0.8	1.95	0.3125	0.437	0.312	0.43	0.824	1.35	0.236	0.150	0.28	25
		KSTI-06	KSTI-06	1000	500	500	1.3	2.40	0.3750	0.500	0.359	0.55	1.022	1.80	0.376	0.180	0.30	22
		KSTI-07	KSTI-07	1100	550	600	2.5	2.50	0.4375	0.562	0.406	0.57	1.082	1.85	0.315	0.205	0.33	22
		KSTI-08	KSTI-08	1200	600	600	2.5	2.80	0.5000	0.625	0.453	0.60	1.191	2.00	0.354	0.205	0.38	22
		KSTI-10	KSTI-10	2100	1050	800	2.5	3.35	0.6250	0.750	0.484	0.70	1.409	2.30	0.413	0.205	0.47	22
		KSTI-12	KSTI-12	3100	1550	1200	4.5	3.75	0.7500	0.875	0.593	0.86	1.687	2.70	0.472	0.270	0.53	22
		KSTI-16	KSTI-16	5400	2700	1600	10.5	5.00	1.0000	1.375	1.005	1.10	2.163	3.50	0.630	0.520	0.68	20

Additional Information

Users who viewed this, were also interested in

KSTM - Metric sizes

KSTM - Metric sizesigus 19.01.2021

EFOM - Metric sizes, with 2 Mounting Holes

EFOM - Metric sizes, with 2 Mounting Holesigus 19.01.2021

EFOM HT - Metric sizes, with 2 Mounting Holes, High temperature

EFOM HT - Metric sizes, with 2 Mounting Holes, High temperatureigus 19.01.2021

DryLin® SAW - Linear axis

DryLin® SAW - Linear axisigus 12.09.2022

DryLin® SHT FF - Fast Forward

DryLin® SHT FF - Fast Forwardigus 12.09.2022

PTGSG-R/L - Counter rotating lead screws

PTGSG-R/L - Counter rotating lead screwsigus 13.09.2022

PTGSG - Single start Trapezoidal Lead Screws

PTGSG - Single start Trapezoidal Lead Screwsigus 13.09.2022

DryLin® TWBM - Manual clamping with high holding strength

DryLin® TWBM - Manual clamping with high holding strengthigus 08.09.2022

JUM-11 - Liner, lower clearance, mm

JUM-11 - Liner, lower clearance, mmigus 20.07.2021

DryLin® SLW - XY-Table

DryLin® SLW - XY-Tableigus 12.09.2022

KGLM SL - Metric sizes, Slim Line

KGLM SL - Metric sizes, Slim Lineigus 19.01.2021

KBLM - Metric sizes, left-hand thread

KBLM - Metric sizes, left-hand threadigus 19.01.2021

EALM - Metric sizes, left-hand thread

EALM - Metric sizes, left-hand threadigus 19.01.2021

AGRM - Ball/Socket Joint (axial in-line), Metric sizes, right-hand thread

AGRM - Ball/Socket Joint (axial in-line), Metric sizes, right-hand threadigus 19.01.2021