SI 42 - Zero force on contact - Nitrogen Springs

CAD模型選擇

	1
	2
	3
	4
	5
	6
	7
	8
	9
	10
	11
	12
	13
	14
	15
	16
	17
	18
	19
	20
	21
	22

		LINA 明細表	CODE - ⁿ/ₐ	CU Stroke [mm]	L Total length [mm]	LMIN Minimum length [mm]	RC Reserves stroke [mm]	D Diameter [mm]	RD Rod Diameter [mm]	P Nominal charging pressure [bar]	PMIN Pressure min. [bar]	F0 Initial force [daN]	F1I Isothermal end force [daN]	F1P Polytropische Endfestigkeit [daN]	V Volume [cm³]	S Surface [cm²]	MAXSPEED Maximum speed [m/s]	W Weight [Kg]	TMIN Temperature min [°C]	TMAX Temperature max [°C]

		SI42-25.1	SI42-25.1	25.0	170	145.0	3	95	60	150	20	4240	6306	7517	200.0	28.27	1.8	6.02	0	80
		SI42-38.1	SI42-38.1	38.0	196	158.0	3	95	60	150	20	4240	6827	8352	283.0	28.27	1.8	6.37	0	80
		SI42-50.1	SI42-50.1	50.0	220	170.0	3	95	60	150	20	4240	7126	8840	360.0	28.27	1.8	6.70	0	80
		SI42-63.1	SI42-63.1	63.5	247	183.5	3	95	60	150	20	4240	7353	9217	447.0	28.27	1.8	7.07	0	80
		SI42-80.1	SI42-80.1	80.0	280	200.0	3	95	60	150	20	4240	7544	9536	553.0	28.27	1.8	7.52	0	80
		SI42-100.1	SI42-100.1	100.0	320	220.0	3	95	60	150	20	4240	7703	9803	681.0	28.27	1.8	8.07	0	80
		SI42-125.1	SI42-125.1	125.0	370	245.0	3	95	60	150	20	4240	7833	10024	842.0	28.27	1.8	8.77	0	80
		SI42-160.1	SI42-160.1	160.0	440	280.0	3	95	60	150	20	4240	7957	10236	1067.0	28.27	1.8	9.73	0	80
		SI42-200.1	SI42-200.1	200.0	520	320.0	3	95	60	150	20	4240	8051	10396	1324.0	28.27	1.8	10.83	0	80
		SI42-250.1	SI42-250.1	250.0	620	370.0	3	95	60	150	20	4240	8128	10528	1645.0	28.27	1.8	12.20	0	80
		SI42-300.1	SI42-300.1	300.0	720	420.0	3	95	60	150	20	4240	8180	10619	1966.0	28.27	1.8	13.57	0	80
		SI42-25-C	SI42-25-C	25.0	170	145.0	3	95	60	0	20	0	0	0	200.0	28.27	1.8	6.02	0	80
		SI42-38-C	SI42-38-C	38.0	196	158.0	3	95	60	0	20	0	0	0	283.0	28.27	1.8	6.37	0	80
		SI42-50-C	SI42-50-C	50.0	220	170.0	3	95	60	0	20	0	0	0	360.0	28.27	1.8	6.70	0	80
		SI42-63-C	SI42-63-C	63.5	247	183.5	3	95	60	0	20	0	0	0	447.0	28.27	1.8	7.07	0	80
		SI42-80-C	SI42-80-C	80.0	280	200.0	3	95	60	0	20	0	0	0	553.0	28.27	1.8	7.52	0	80
		SI42-100-C	SI42-100-C	100.0	320	220.0	3	95	60	0	20	0	0	0	681.0	28.27	1.8	8.07	0	80
		SI42-125-C	SI42-125-C	125.0	370	245.0	3	95	60	0	20	0	0	0	842.0	28.27	1.8	8.77	0	80
		SI42-160-C	SI42-160-C	160.0	440	280.0	3	95	60	0	20	0	0	0	1067.0	28.27	1.8	9.73	0	80
		SI42-200-C	SI42-200-C	200.0	520	320.0	3	95	60	0	20	0	0	0	1324.0	28.27	1.8	10.83	0	80
		SI42-250-C	SI42-250-C	250.0	620	370.0	3	95	60	0	20	0	0	0	1645.0	28.27	1.8	12.20	0	80
		SI42-300-C	SI42-300-C	300.0	720	420.0	3	95	60	0	20	0	0	0	1966.0	28.27	1.8	13.57	0	80

Additional Information

看過這個的用戶也對此感興趣

Model 65M - Metric Bevel Gear Drives

Model 65M - Metric Bevel Gear DrivesHub City 15.09.2021

CSJ30-TNKE 25.06.2021

CSJ30-HNKE 25.06.2021

Elbow, Aluminium acc. to EN 754/755, EN AW 1070A-0, seamless, sim. to DIN 2605 - Long Radius

Elbow, Aluminium acc. to EN 754/755, EN AW 1070A-0, seamless, sim. to DIN 2...Huelsen 10.02.2021

MX2 - Extended rear tie rods

MX2 - Extended rear tie rodsStern 18.05.2013

Elbow, Copper-Nickel acc. to DIN 86019, CuNi10Fe1,6Mn, seamless, sim. to DIN 86090 - Short Radius

Elbow, Copper-Nickel acc. to DIN 86019, CuNi10Fe1,6Mn, seamless, sim. to DI...Huelsen 10.02.2021

Elbow, Aluminium acc. to EN 485, EN AW 5754-0/H112, welded, sim. to DIN 2605 - Long Radius

Elbow, Aluminium acc. to EN 485, EN AW 5754-0/H112, welded, sim. to DIN 260...Huelsen 10.02.2021

Elbow, Aluminium acc. to EN 755, EN AW 6060-T66, sim. to DIN 2605 - R~2.5 x NB

Elbow, Aluminium acc. to EN 755, EN AW 6060-T66, sim. to DIN 2605 - R~2.5 ...Huelsen 10.02.2021

Model RA1 - Model RA1

Model RA1 - Model RA1Hub City 15.09.2021

Model 66M - Metric Bevel Gear Drives

Model 66M - Metric Bevel Gear DrivesHub City 15.09.2021

MF4 - Rear flange

MF4 - Rear flangeStern 17.05.2013

MT2 - Cap trunnion

MT2 - Cap trunnionStern 17.05.2013

MS2 - Side foot

MS2 - Side footStern 17.05.2013

MF3 - Front round flange

MF3 - Front round flangeStern 17.05.2013